Desert Canyon Diorama 3D Print Files

£9.99
0 ratings

STL files for a desert canyon diorama based on two scenes from a classic sci-fi movie franchise. You can add a star fighter on a test flight or a ground race below if you want.

The files are 1/144 and I have test printed on a larger format Whale 2 resin printer. I have printed one piece on a filament printer at 0.1mm and a 0.4mm nozzle with good results.

Check out this video to see how to put the diorama together: https://youtu.be/RpfHNFNIdBQ

There are two sets of files - the first supported for resin printing - and the second is the original STLs.

There are 8 pieces which clip together with OpenLOCK clips. You will need to print 12 base clips and 38 springy clips. I printed the clips on my filament printer at 0.3mm but if you want to print in resin then you will need a flexible resin.

OpenLOCK is an open-source scenery building system developed by www.printablescenery.com. OpenLOCK is a trademark of Printable Scenery. All rights reserved www.printablescenery.com.

Not included: Star Fighter from Galactic Armory, Banthas and Tusken Raiders from Thingiverse.

I want this!

NO REFUNDS

As this is an electronic-only product, once downloaded you will have access to it including the ability to copy it for personal use as much as you want. There are no refunds because you can always keep a copy. All of the files are test printed so if you have any issues, please get in touch and I will look at it with you.

Last updated Feb 23, 2024

STL files for a desert canyon based on two scenes from a classic movie franchise.

£9.99

Desert Canyon Diorama 3D Print Files

0 ratings
I want this!